Veneer Plywood Suppliers‎ in bangalore

In the field of woodworking, veneer popularly refers to thin sheets of wood, usually sleak and thin , around 3mm, that is typically adhered into core panels (typically used materials being, wood, fibre board or particle board of medium density) to generate flat panels for cabinets and doors, or tops and parquet floors and different parts of a furniture.

They are also famously utilised in marquetry. Plywood is usually composed of three layers or more of veneer, each stuck with adequate grain at angles (90 degrees- right angles) to adjacent layers for strength and long-life. Veneer beading is a plain thin layer of edging that is decoratively placed around objects, such as safe-keeping boxes, the popular example being Jewelry Boxes. Veneer is also used as a replacement or substitute for decorative papers in Wood Veneer HPL. The other forms that Veneer takes up is that of a manufactured board.

 The widely used method to obtain Veneer is by peeling the trunk of an aged tree or by cutting large rectangular or square slices of blocks of wood easily identified as flinches. The appearance of it is imparted by the figure and the grain in wood comes from slicing through into the growth rings visible when you cut a tree in half and is dependent upon the angle at which the wood is sliced. There are three main types of Veneer that are commercially accessible, they are-

Rotary Lathe- This is one in which the wood is held against a very sharp blade, and is detached off in one semi-continuous or full-continuous roll. For the creation of normal Plywood, rotary cut is used, but the resulting appearance is not as desired because it is cut concentric to the growth rings.

The flitch or piece of wooden log is raised to height and lowered in a slicing machine against the blade and the slices of the particular log are formed. This outcome or the yield is Veneer that looks like sawn or scaled chunks/pieces of wood, as mentioned above is cut across the growth rings; this type of veneer is called as “crown cut”.

Half-round lathe- is one in which the chunk of wooden log can be twisted and moved so as to expose or showcase the interesting parts of the grain. Every slicing process adds a very characteristic type of grain, reliant upon the species of the tree. In the aforementioned veneer slicing methods, an alteration of the grain happens. As it smashes the wood, the blade knife produces a “moveable” side where the cells have been unfastened up by the blade, revealing the tight side.

The premium and scarcest logs are sent to firms that manufacture veneer. There are a lot of benefits to this practice. Firstly, it delivers the most economic gain to the proprietor of the log. Secondly, and of most importance is the benefits to the woodworker, it significantly increases the sum of usable wood. There are many Plywood companies in India and they sell quality wood that has a long-lasting shelf life and guaranteed to look exponentially good on a home environment. It also is cost-saving and the wood is reliable and incredibly resists termites and other wood-digesting pests.